Oceanic BC Mode D'emploi page 11

NOTE: Remove the tank from the BC to make the adjustment. Before reinstalling the
tank,besurethe2halvesofthebandclosurearefirmlypressedtogetherandsecure.
• With the BC on your shoulders and waist band properly adjusted, tighten the shoulder straps by
pulling down on the d-rings located on the ends of the straps.
ACCESSORY ATTACHMENT and HOSE ROUTING
Various d-rings and hose holder clips are provided for each model BC to facilitate streamlining of hoses
and convenient mounting of accessory equipment.
• An epaulette style retainer on the left shoulder strap secures the corrugated and LP Inflator Hoses,
preventing them from floating back out of reach.
• The LP Inflator Hose should also be clipped in the plastic holder at the top of the corrugated hose.
• The hose retainers above the pockets keep the Octopus and instrument console in position.
• D-rings provided on the bottom edge of the BC can be used for attaching lights, game bags, etc.
BC REMOVAL
While your buddy holds the BC/tank assembly securely:
• Unclip the chest strap,if your model has one, and waist strap.
• Open the waist band.
• Loosen the shoulder straps by lifting up on the tabs, or unclip the Quick Release Buckles. Some
models only have a Quick Release Buckle on the left shoulder strap.
• Remove the BC/tank assembly.
11