Oceanic BC Mode D'emploi page 18

QLR WEIGHT RELEASE SYSTEM
Removing QLR Pockets from the BC
• Grasp the Handle of the Pocket and compress the side tabs of the Buckle (Fig. 4).
• Open the Flap by pulling firmly upward with the Handle (Fig. 5).
• Pull the Pocket straight out of the cavity of the BC (Fig. 6).
Loading Weights into the QLR Pockets
• Open the Flap of the Pocket (Fig. 7).
• Insert the desired Weight in the Pocket (Fig. 8).
• Secure the Flap of the Pocket (Fig. 9).
Fig. 4
Fig. 7
18
Fig. 5
Fig. 8
Fig. 6
Fig. 9