Oceanic BC Mode D'emploi page 24

To adjust the length of the Waist Band:
• Place the BC flat on the floor with the waist band and shoulder strap buckles open as indicated
by the illustrations.
• Pull the inner back padding down and away from the solid back plate.
• Loosen the self-gripping fastener that secures the end of the waist band that passes through the 2
slots of the back plate.
• Adjust the length of the waist band as desired, and secure the self gripping fastener.
CROTCH STRAP
An optional Crotch Strap (Oceanic PN 08.0095) can be used with select model Oceanic BCs.
• Connect the single leg of the Y-shaped strap through the lower slot of the hard back plate.
• To access the slots, pull the inner back padding down and away from the back plate.
• Connect the 2 portions with Quick Disconnects through the d-rings on the lower/front of the BC.
• Repeat for the other side.
24