Procedure For Tilting Down; Cruising In Other Conditions; Cruising In Salt Water - Yamaha F80A Manuel D'utilisation

EMU00303

PROCEDURE FOR TILTING DOWN

Power trim/tilt model
1) Push the power trim/tilt switch "UP"
until the engine is supported by the
tilt rod.
2) Release the tilt-support lever.
3) Push the power trim/tilt switch "DN"
(Down) to lower the engine to the
F1015
desired position.
EMU01030
CRUISING IN OTHER

CRUISING IN SALT WATER

After operating in salt water, wash out the
cooling-water passages with fresh water
to prevent them from becoming clogged-
up with salt deposits.
NOTE:
Refer to cooling system flushing instruc-
tions in "TRANSPORTING AND STORING
OUTBOARD MOTOR".
3-18
CONDITIONS
GB