Tilt Support Lever; Top Cowling Lock Levers; Flushing Device - Yamaha F80A Manuel D'utilisation

GB
EMU00157

TILT SUPPORT LEVER

To keep the outboard motor in the tilted-
up position, lock the tilt support lever to
the clamp bracket.
F1009
EMU00163

TOP COWLING LOCK LEVERS

To remove the engine top cowling, pull
up the front and rear lock levers. Then lift
off the cowling. When replacing the cowl-
ing, check to be sure it fits properly in the
rubber seal. Then lock the cowling again
by moving the levers downward.
F1008A
F1008B
EMU01146

FLUSHING DEVICE

q
This device 1 is used to clean the cooling
water passages of the motor using a gar-
den hose and tap water.
NOTE:
Refer to "Cleaning Cooling-water Pas-
sages" in Chapter 4 for instructions on
usage.
000365
2-11