iRoom touchDock Manuel page 9

MANUAL
5. Insert the backbox with the
attached aluminum frame
into the recess. Make sure the
back box orientation is correct
according to the stickers
„Right" for horizontal or „Top"
for vertical installation.
Do not deform the back box.
The wider side of the
aluminum frame needs to be
on the left side for horizontal
installation or on the bottom
side for vertical installation
(touchDock mini on the top
side).
Page 9
6. touchDock:
Feed the mounting clamps /
doglegs through the openings
in the corners of the back
box and and use the included
screws and washer to press
the clamps tightly against the
back of the drywall.
touchDock mini:
Use a Philips #2 screwdriver
to press the pre-installed
clamps tightly against the back
of the drywall.
for iRoom's touchDock
Make sure the back box sits
straight and flush in the wall
recess.