iRoom touchDock Manuel page 17

MANUAL
for iRoom's touchDock
General Settings
LED Brightness
Adjust the brightness of the Quick Keys
backlight.
Security
Change the code to access the app.
Touch Code Function
Activate the antitheft protection of the iPad.
Removal of the iPad can only be performed
by entering the touch code.
Press any two quick keys for about 2
seconds until the green LED starts flashing.
Enter the touch code and confirm by
pressing the Quick Key with the green LED.
Default touch code is 1 2 3 4
iBezel Function
See next page
Beep when Button pressed
Activates the acoustic feedback on button
press.
IP Direct Control Active
Allows to control devices via IP commands.
Page 17