iRoom touchDock Manuel page 13

MANUAL
How to Dock
1. Press and hold any two quick keys on the glass frame for about
2 seconds until the glass panel slides out.
If the quick keys don't work you might have installed the docking
station without turning off the main power before. Disconnect the
docking station from power for 3 minutes before reconnecting to
resolve the issue.
2. Insert the iPad from the right side or from the top depending on
whether the touchDock is installed horizontally or vertically and
slide it into the guide rails. Push the iPad towards the charging
connector until you hear a click noise.
The glass panel will slide back automatically as soon as the
charging connector makes full contact with the charging port of
the iPad.
Page 13
for iRoom's touchDock