Publicité
Les langues disponibles
Les langues disponibles
4. Attach the glass panel to the
Aluminum arm on the docking
station and secure with the 4
flat head screws M3 x 6.
Important Note:
Do not over-tighten the
screws to avoid breaking the
glass panel.
5. Connect the other end of the
keypad control cable to the
connector on the magnetic
glass frame.
intelligence. on.
6. Attach the magnetic glass
frame to the aluminum frame.
The magnets will hold the
glass frame.
7. Connect power AC or PoE+
power source to boot
the docking station and
proceed with setting up your
touchDock using the iOS App
„iRoom's iDock"
If you have installed the
docking station with main
power on or a PoE+ switch
connected, disconnect the
docking station now from
power for 3 minutes before
reconnecting to ensure proper
functionality.
Page 12
Publicité
