Publicité
Les langues disponibles
Les langues disponibles
Safety and operating instructions
WARNING Projectiles
During operating, particles or jets of liquid may
become projectiles and cause personal injury by
striking the operator or other persons. To reduce
these risk:
Use approved personal protective equipment and
►
safety helmet, including impact resistant eye
protection with side protection.
Make sure that no unauthorised persons trespass
►
into the working zone.
►
Keep the workplace free from foreign objects.
Jets of liquid from the discharge hose could
►
contain solids travelling at a great speed. Do not
direct the liquid jets towards other personnel.
WARNING Slipping, tripping and falling
hazards
There is a risk of slipping or tripping or falling, for
example tripping on the hoses or on other objects.
Slipping or tripping or falling can cause injury. To
reduce this risk:
Always make sure that no hose or other object is
►
in your way or in any other person's way.
►
Always make sure you are in a stable position with
your feet as far apart as your shoulders width and
keeping a balanced body weight.
DANGER Electrical hazard
The machine is not electrically insulated. If the
machine comes into contact with electricity, serious
injuries or death may result.
Never operate the machine near any electric wire
►
or other source of electricity.
►
Make sure that there are no concealed wires or
other sources of electricity in the working area.
WARNING Involuntary start
Involuntary start of the machine may cause injury.
Keep your hands away from the start and stop
►
device until you are ready to start the machine.
►
Learn how the machine is switched off in the event
of an emergency.
►
Stop the machine immediately in all cases of
power supply interruption.
8
www.CrowderSupply.com • Toll Free: 888-883-5144
© 2010 Atlas Copco Construction Tools AB | No. 9800 0958 90 | 2010-04-16
WARNING Noise hazard
High noise levels can cause permanent and disabling
hearing loss and other problems such as tinnitus
(ringing, buzzing, whistling, or humming in the ears).
To reduce risks and prevent an unnecessary increase
in noise levels:
Risk assessment of these hazards and
►
implementation of appropriate controls is essential.
Operate and maintain the machine as
►
recommended in these instructions.
►
Always use hearing protection.
Maintenance, precautions
WARNING Machine modification
Any machine modification may result in bodily injuries
to yourself or others.
►
Never modify the machine. Modified machines are
not covered by warranty or product liability.
Always use original parts and accessories
►
approved by Atlas Copco.
►
Change damaged parts immediately.
►
Replace worn components in good time.
Storage, precautions
♦
Keep the machine and tools in a safe place, out
of the reach of children and locked up.
DIP 25, 35, 65
Original instructions
Publicité
