Install The Removable Pillows - Kohler RiverBath K-1360 Guide D'installation

Position the small
pillows as desired
above the waterline

12. Install the Removable Pillows

CAUTION: Risk of product damage. Do not submerge the pillows underwater or use them as seat cushions.
NOTE: For best attachment to the whirlpool surface, moisten the back surface of the pillows at the suction cup
locations.
- Clean the whirlpool surface of any soap film or oils. Suction cups are located on the back side of the pillows.
Position the large pillow in the appropriate location on the whirlpool ledge, and press down firmly at the suction
cup locations with the heel of your hand. Position the small pillows as desired above the waterline by again
pressing down firmly with the heel of your hand. Check to make sure that the pillows are attached firmly to the
whirlpool.
- Detach the pillows by lifting them off the whirlpool surface.
Kohler Co.
Position the large pillow
on the whirlpool ledge,
and press down firmly
with your hand
11
A
1012489-2-