Replacing The Grease Filter For Recirculation Ventilation; Replacing The Charcoal Filter For Recirculation Ventilation; Replacing The Grease Filter For Wall And Roof Ventilation - Whirlpool YWML35011KS Mode D'emploi

Replacing The Grease Filter For
Recirculation Ventilation
Grease Filter:
The grease filter is located on the underside of the microwave
oven. The grease filter should be removed and cleaned at least
once a month.
1. To remove the grease filter, use a Phillips screwdriver to
remove the screw on the Grease Filter.
Grease Filter
Grease Filter screw
2. Hold the left side of the Grease Filter, swing it to the right
position, and remove it from the slotted area.
A
A. Bottom Plate
B. Grease Filter and Charcoal Filter
C. Slotted-Area
3. Separate the grease filter from the charcoal filter.
Grease Filter
4. Clean the grease filter monthly, or replace with new grease
filter if necessary.
5. Reattach the grease filter to the charcoal filter.
6. Put the grease filter and charcoal filter back to the Bottom
Plate slotted area.
7. Secure the grease filter and charcoal filter back to the bottom
plate with the grease filter screw.
14
MICROWAVE OVEN CARE
Bottom Plate
B C
Charcoal Filter
Replacing The Charcoal Filter For
Recirculation Ventilation
Charcoal Filter:
The charcoal filter is behind the grease filter at the bottom of the
microwave oven. The charcoal filter cannot be cleaned and should
be replaced about every 6 months.
Repeat steps 1 to 3 from the "Replacing grease filter For
Recirculation Ventilation".
1. Replace the old charcoal filter with a new charcoal filter. Attach
it to the grease filter.
2. Put the grease filter and the charcoal filter back to the bottom
plate slotted area.
3. Secure the grease filter and the charcoal filter back to the
bottom plate with the grease filter screw.
Replacing The Grease Filter For Wall
and Roof Ventilation
Grease Filter:
The grease filter is located on the underside of the
microwave oven. The grease filter should be removed and cleaned
at least once a month.
1. To remove the grease filter. Use a Phillips screwdriver to
remove the screw on the grease filter.
Grease Filter screw
2. Hold the left side of the grease filter, swing it to the right
position, and remove it from the slotted area.
A
A. Bottom Plate
B. Grease Filter
C. Slotted-Area
3. Clean the grease filter monthly, or replace it with new grease
filter if necessary.
4. Reattach the grease filter to bottom plate.
5. Secure the grease filter back to the bottom plate with the
grease filter screw.
Bottom Plate
Grease Filter
B C