Scope Of Delivery; Technical Specifications; Coupling Requirements - LAS SD260 Manuel De L'opérateur

Scope of delivery

A = bike carrier
B = 2 keys
C = 2 safety straps for front wheels
D = 1 Safety strap for bicycle frame
E = frame holder long
F = frame holder short
G = assembly instruction and safety regulations
Unpack all the components and check for the presence of all parts.

Technical specifications

Material:
No of bicycles
Net weight:
Max. load:
Load capacity per wheel rail
(max.)
Wheel base (max.)
Rail gap
Max. tyre width up to
Slidable
Dimensions (WxHxD):
The bike carrier is suitable for the transport of two bicycles at most.
Please check the maximum permissible ball load. You can find it on
the identification plate of the tow bar of your car
The total weight of the bike carrier with the bicycles cannot exceed
the maximum permissible ball load of the tow bar.
Steel/aluminium
2
approx. 20,5 kg
60 kg
30 kg
130 cm
24 cm
3,25 inches
Yes
approx.108 x 75 x 60 cm
Max. permissible Weight bike carrier
ball load
50 kg
60 kg
75 kg
90 kg
120 kg

Coupling Requirements

DANGER!
The tow hitch breaking can cause injury to
people.
The coupling may break as a result of fitting the
bicycle carrier on a coupling in a material that is too
soft.
Fit the bicycle carrier only on a coupling made
4
of St52 steel, GGG52 grey cast iron or better
quality.
Never fit the carrier on a coupling made of
4
aluminium, other light metals or plastic.
Only suitable for use on the coupling of a
4
passenger car.
Note the instructions of the coupling
4
manufacture.
ø 15 - 19 mm
ø 49,61 - 50 mm
ø 27 - 29 mm
Fit the bicycle carrier only on tow hitches with the following
properties:
Material: ............................... Min. St52 steel or GGG52 grey cast iron
D-value.................................................................... ≥ 7,6 kN
Tow ball: Ø50mm (class A-50 according EC 94/20 or ECE R55)
Max. carrying
capacity
20,5 kg 29,5 kg
20,5 kg 39,5 kg
20,5 kg 54,5 kg
max. 60 kg
20,5 kg
max. 60 kg
20,5 kg
21