Dentsply Maillefer propex pixi Manuel D'utilisateur page 16

6.6.4 Over-instrumentation
A red "OVER" segment and an audio warning signal (rapid intermittent signal) indicate
that the file has passed the apex – pic. 13.
6.7 Sound adjustment
propex pixi
is equipped with an audio indicator which enables monitoring of the
™
•
progression of the file within the canal in addition to visual monitoring.
The volume can be adjusted to four different levels: mute, low, normal and high, by
successively pressing the
When sound level is muted the
icon remains turned on.
6.8 Demo mode
The built-in demo mode is available to become acquainted with the device and to
demonstrate its operation.
1. Disconnect the measuring cable or the charger from the device, if connected,
and turn the device off.
2. To start the demo mode, press and hold the
2 seconds. until the whole display turns on (Pic. 14) and immediately turns off
again accompanied by two beeps.
Pic. 13
"VOLUME" button.
icon is turned off. At other sound levels the
16
"ON / OFF" button for about