Lindy 32828 Manuel page 8

English Manual
Rear View:
1
1. Power Jack
The power adapter plugs in here. The unit is designed to be operated non-powered (no
external power required), in which case it takes the necessary power for its operation from
the computers it connects to. Generally speaking, the only time that external power is
required is when you cascade it, or if operation becomes erratic because the unit isn't
obtaining enough power from the computer connections. If you choose to use external power,
the power adapater cable plugs in here.
2. Console Port Section
If this is a first level unit, your monitor, keyboard and mouse plug in here.
If this is a cascaded unit, the cables that link up to a port on a higher CPU Switch unit plug in
here.
3. CPU Port Section
The cables that link to the PCs plug in here.
Introduction
Before you Begin
Make sure that power to all the devices you will be connecting up have been turned
off. To prevent damage to your installation due to ground potential difference, make
sure that all devices on the installation are properly grounded.
2 3
4