Lindy 32828 Manuel page 13

English Manual
Port Key In Examples:
1. To access a computer attached to Port 3 of a Single Stage installation, key in 3 for the
Port ID, as follows:
2. To access a computer attached to Port 1 of a Third Stage unit that is cascaded down
from Port 4 of a Second Stage unit, which, in turn, is cascaded down from CPU Port 2
of the First Stage unit key in 241 for the Port ID, as follows: [Ctrl+Alt+Shift] 2 4 1
[Enter]
When you key in the Port ID, note the following:
w
You must key in the Port ID and press [Enter] within 1 second for each keypress after
pressing the [Ctrl+Alt+Shift] combination.
w
Number keys must be pressed from the regular keyboard.
w
The number keys must be pressed and released one key at a time.
w
If you submit an incorrect Port ID you are returned to the OSD Menu.
w
OSD Port Selection
To enter the OSD Main Menu, press the Ctrl key twice ([Ctrl] [Ctrl]). You can use either the left
or right Ctrl keys (both left, or both right).
Note: You can optionally change the hotkey to the Scroll Lock key (see F6, below), in which
case you would press [Scroll Lock] [Scroll Lock].
From there, either:
Invoke the Hotkey function with [Ctrl+Alt+Shift]; key in the Port ID (see Port ID Numbering,
below, for details); then press [Enter],
or
Navigate with the Arrow Keys to move the Highlight Bar to the port you want; then press [Enter].
Hotkey Summary Table
This Combination:
[Ctrl] + [Ctrl]
[Scroll Lock] + [Scroll Lock]
[Ctrl+Alt+Shift] [Port ID]
[Enter]
[Ctrl+Alt+Shift] [0] [Enter]
[Ctrl+Alt+Shift] 3 [Enter]
Does This:
Invokes OSD (Default)
Invokes OSD (Alternate Method)
Switches access to the computer that corresponds
to the Port ID number (see Port Key In Examples,
above).
To invoke Auto Scan mode.
9