Troubleshooting - Lindy 32828 Manuel

English Manual

Troubleshooting

ymptom
Erratic
Behavior
Pressing
Hot Keys
gets no
response
Mouse not
responding
ossible Cause
Unit not receiving
enough power under
self-powered operation.
The connection from
the selected port to the
target PC has been
detached, broken, or
the PC is turned OFF.
Improper keyboard
reset.
Improper LINDY CPU-
Switch LITE reset.
Incorrectly keying in
the Port ID.
Improper mouse reset.
ction
Use the Power Adapter that was supplied
with the unit to provide external power.
Check the Online LED for the selected port.
If it is not lit:
Manually press one of the Select switches
to connect to a PC that is powered ON.
Check the cables to make sure they all are
properly connected.
Reset the keyboard (and mouse) by
simultaneously pressing Buttons 1 and 2 on
the First Stage unit for 3 seconds.
Unplug the keyboard connector from the
Console Keyboard Port, then plug it back
in.
Turn off all LINDY CPU-Switch LITE units
and wait five seconds before turning them
back on.
Note: If the unit is operating under Self-
powered mode (without the optional Power
Adapter), you must unplug the power cords
of all PCs that have the Keyboard 'Power
On' function, otherwise the switch will still
be receiving power from the PCs.
After invoking the hotkey function with
[Ctrl+Alt+Shift] combination, be sure to key
in the Port ID and press [Enter] within 1
second for each key.
Reset the mouse (and keyboard) by
simultaneously pressing Buttons 1 and 2 on
the First Stage unit for 3 seconds.
Unplug the mouse connector from the
Console Mouse Port, then plug it back in.
16