English - Milwaukee M18-28 CPDEX Notice Originale

TECHNICAL DATA
Dust extractor
Production code
Stroke max.
Drilling capacity max.
Drill bit length max.
Drilling depth max.
Weight
WARNING! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury. Save all warnings and
instructions for future reference.
It is also essential that you read and follow the user manual
for the hammer drill you use.
GB
HAMMER SAFETY WARNINGS
Wear ear protectors. Exposure to noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool. Loss of
control can cause personal injury.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring. Cutting accessory contacting a „live"
wire may make exposed metal parts of the power tool „live" and
could give the operator an electric shock.
Additional Safety and Working Instructions:
Do not use the dust extractor for drilling work in wood, steel or
plastic.
Do not use machines on any material containing asbestos.
The following materials should not be picked up by the
vacuum cleaner
• hazardous dust
• flammable, explosive dust (e.g. magnesium or aluminium dust,
etc.)
Despite using the dust extractor, a small amount of dust may still
escape.
BThe dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.
Only use the appliance if it is in perfect condition. Never use the dust
extractor without a filter, or if the filter is damaged.
SPECIFIED CONDITIONS OF USE
The dust extractor is designed for the extraction of dust in drilling
applications with hammer drills in stone and concrete.
The dust extractor may only be used as an accessory for the following
machines: Milwaukee M18 CHPX, M28 CHPX

English

8
MAINTENANCE
M18-28 CPDEX
The ventilation slots of the machine must be kept clear at all times.
4468 11 01... Use only Milwaukee accessories and Milwaukee spare parts. Should
4524 67 01... components need to be replaced which have not been described,
... 000001-999999 please contact one of our Milwaukee service agents (see our list of
guarantee/service addresses).
105 mm
If needed, an exploded view of the tool can be ordered. Please state
16 mm
the machine type printed as well as the six-digit No. on the label
and order the drawing at your local service agents or directly at:
160 mm
Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Winnenden,
90 mm
Germany.
1,7 kg
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that the product described
under "Technical Data" fulfills all the relevant provisions of the directi-
ves 2011/65/EU (RoHS), 2004/108/EC, 2006/42/EC and the following
harmonized standards have been used:
EN 60745-1:2009 + A11:2010
EN 60745-2-6:2010
EN 55014-1:2006 + A1:2009 + A2:2011
EN 55014-2:1997 + A1:2001 + A2:2008
EN 50581:2012
Alexander Krug / Managing Director
Authorized to compile the technical file
Techtronic Industries GmbH
Max-Eyth-Straße 10, 71364 Winnenden, Germany
SYMBOLS
Always wear goggles when using the machine.
Winnenden, 2015-03-16
Please read the instructions carefully before starting the
machine.
CAUTION! WARNING! DANGER!
Remove the battery pack before starting any work on the
machine.
Wear a suitable dust protection mask.
Do not dispose of electric tools together with household
waste material. Electric tools and electronic equipment
that have reached the end of their life must be collected
separately and returned to an environmentally compatible
recycling facility. Check with your local authority or retailer
for recycling advice and collection point.
European Conformity Mark
EurAsian Conformity Mark