Panasonic AJ-RC10G Guide De Fonctionnement page 8

Parts and functions
Basic camera operations (Continued)
!9" !10"
H
!9" GAIN display
This displays the image gain of the camera
recorder. The initial value is 0 dB.
!10" M.GAIN 3 button
When this button is pressed, the image gain
of the camera recorder is increased.
The lamp is on only when this button is
pressed.
!11" M.GAIN 4 button
When this button is pressed, the image gain
of the camera recorder is reduced.
The lamp is on only when this button is
pressed.
E-7
(Continued)
!11" !12" !13"
!12" AWB button
When this button is pressed, the camera
recorder starts the AWB (Auto White
Balance) operation.
The lamp is on during AWB operation and
off when the operation is completed
correctly. If AWB operation finishes
incorrectly, the lamp will flash for 5 seconds
and then turn off.
When the white balance is set to PRE using
the PRE/A/B button, the previously set color
temperature ("3.2K" and "5.6K") can be
switched each time the AWB button is
pressed.
!13" ABB button
When this button is pressed, the camera
recorder starts the ABB (Auto Black
Balance) operation.
The lamp is on during ABB operation and off
when the operation is completed correctly. If
the ABB operation finishes incorrectly, the
lamp will flash for 5 seconds and then turn off.