Operation Of The Camera Using The Unit Volume - Panasonic AJ-RC10G Guide De Fonctionnement

Basic operation

Operation of the camera using the unit volume

When the lamp of the PANEL ACTIVE button is
on, operations of the M.PED volume and the
IRIS volume are enabled. When the lamp of the
AUTO IRIS button is on, the IRIS volume
functions as the volume for setting the target
value of the auto iris. When the lamp of the VR
ACTIVE button is on, operations of the GAIN
volume and the BLACK volume are enabled.
In the unit menu, it is possible to select whether
the GAIN volume and the BLACK volume are
operated in the absolute value mode or the
relative value mode.
<Notes>
In the relative value mode, the value will not
change when the volume operation is enabled,
but it will change by the amount that the
volume turned from the position when the
volume operation was enabled.
In the absolute value mode, the value will be
fixed according to the position of the volume
when the volume operation was enabled, and
the value for the center click is 0.
A variable range for the volume can be
selected as follows.
Volume variable range
MIN
n50
GAIN
n25
BLACK
* The variable range of AG-HPX500 is from - 128 to + 127.
1) GAIN volume
When the white balance is set using the PRE/
A/B button and the auto white balance (AWB)
executes, the lamp of the VR ACTIVE button
turns off, and the volume operation is
disabled.
When the AWB is executed, the set value for
GAIN is 0.
When the relative value mode and the
absolute value mode are switched, the lamp
of the VR ACTIVE button turns off and the
volume operation is disabled. (The GAIN
value is unchanged.)
(Continued)
NORMAL MAX
n100
-128 to
+127
n50 n100
2) BLACK volume
This operates as the adjustment volume of
the pedestal (PED).
However, if Flair (FLR) is selected in BLACK-
VR-CONTROL on the menu of the unit, this
function is disabled.
When Auto Black Balance (ABB) is executed,
the lamp for the VR ACTIVE button is turned
off and the volume will be disabled.
Changes in the VR ACTIVE button when the ABB is executed
VR BLACK-VR-
setting CONTROL
PED
REL
(relative
value)
FLR
PED
ABS
(absolute
value)
FLR
Changes in the volume set value when the ABB is executed
VR BLACK-VR-
setting CONTROL
REL PED
(relative
FLR
value)
ABS PED
(absolute
FLR
value)
* When the unit is connected to the AG-HPX500, settings for
the shaded part (indicated by the
When the BLACK-VR-CONTROL item in the
unit menu changes, the lamp of the VR
ACTIVE button turns off, and the volume
operation is disabled.
PEDESTAL OFFSET
OFF ON
Turned off Turned off
(disabled) (disabled)
Retains Retains
state state
Turned off Turned off
(disabled) (disabled)
Retains Retains
state state
PEDESTAL OFFSET
OFF ON
Cleared to 0 Retains
Retains Retains
Cleared to 0 Retains
Retains Retains
) are unavailable.
E-16