Publicité
Les langues disponibles
Les langues disponibles
Using the automatic warm-up function
Switching on the automatic warm-up function
The duration of the warm-up phase depends on the heat setting selected.
Set the required heat setting (
The set power level lights up in the digital display.
lights up in the digital display after approx. five seconds.
The automatic warm-up function is activated.
In the event of residual heat being present the automatic warm-up function will
not be activated for this cooking zone.
After the end of the warm-up time, the heat setting selected will be shown again.
When the automatic warm-up function is active select a higher heat setting, e.g.
instead of
setting.
If you select a lower heat setting the automatic warm-up function will be switched
off immediately.
Switching off the automatic warm-up function
Only an activated automatic warm-up function may be switched off.
Touch the „heat setting selection"
The heat setting selected lights up in the digital display.
The automatic warm-up function is switched off.
Do not use the automatic warm-up function
to
) via the "heat setting selection" sensor field
, the warm-up time will be automatically adjusted to the selected heat
sensor field.
18
.
Publicité
