Lenze E94AZMP0084 Instructions De Montage page 50

6 Electrical installation
Important notes
6 Electrical installation
6.1 Important notes
Installation must
ƒ
–
always be in accordance with the operating conditions specified in the
Technical data (¶ 40).
–
be carried out to EN 60204−1.
Please observe the following when selecting the cable type:
ƒ
–
The cables used must comply with the approvals required for the
application (e. g. VDE, UL etc.).
–
Fuses and cable cross−sections must be dimensioned in accordance with
the specifications in the documentation for the basic device.
{
Danger!
Dangerous electrical voltage
All power terminals remain live for up to three minutes after mains
disconnection.
Possible consequences:
ƒ
Protective measures:
ƒ
ƒ
50
Death or severe injuries when touching the power terminals.
Switch off the power supply and wait for at least three minutes
before working on the power terminals.
Make sure that all power terminals are deenergised.
l
EDK94AZMP DE/EN/FR/ES/IT 8.0