Beurer Fascia-ReleaZer MG 800 Mode D'emploi page 17

Action
1st press
of the button
2nd press
of the button
3rd press
of the button
The Fascia-ReleaZer
or dynamically (moving application).
Static application:
This method loosens specific areas of hardness. Press down evenly
on the same spot approx. 3 times in succession.
Dynamic application:
The movement smooths out the fascias. Moving the device quickly
forwards and backwards provides a surface massage for the upper
tissue. Moving the device more slowly allows the massage effect
to penetrate deeper.
Avoid striking the device against the treatment area as this may
result in hematoma.
Vibration setting
The Fascia-ReleaZer
=
function light shows steady green.
Static vibration
The function light flashes green.
=
Wave-action vibration
The Fascia-ReleaZer
=
function light goes out.
can be used statically (targeted application)
®
switches on and the
®
switches off and the
®
17