Explanations - Becker Centronic VarioControl VC420 Notice De Montage Et D'utilisation

Assembly and Operating Instructions

Explanations

Outputs
Connect the drive to the outputs of the device. The arrows on the device indicate
the running direction of the drive.
Light/drive
A bridge connection between L and the encoding terminal light/drive allows the
running time to be increased from 120 seconds to infinity.
Venetian blind/roller shutter
A bridge connection between L and the encoding terminal venetian blind/roller
shutter allows the receiver to be controlled in nonmaintained command mode.
Press and hold the control command button for more than 1 second to move the
blind in maintainedcommand mode.
Individual inputs
If you press one of the up or down buttons of the maintained switch for more
than 0,5 seconds, the blind/shutter will move automatically in the chosen di-
rection to the final position. If you touch it for less than 0,5 seconds, the blind/
shutter will move and stop again immediately.
20