Limiting The Door Opening Angle To 90; Adjusting The Resilience Of The Hinges; Installation Options - Electrolux IK261BR Notice D'utilisation

Limiting the door opening angle to 90°
If necessary, limit the maximum door opening angle to 90°.
Important
It is necessary to remove the refrigerator door in
order to be able to insert the pin in the top hinge of
the freezer door.
The pins must be inserted before the appliance is
installed in the recess.
It is not possible to insert the top pin once the appli-
ance has been installed.
Open the door to just under 90°.
Fully insert pins (enclosed in the
accessory pack) in each hinge in
the opening shown.
The pin in the top hinge of the
freezer door can only be inserted
when the refrigerator door is
removed.

Adjusting the resilience of the hinges

The opening resilience of the door can
be adjusted.
- Turn clockwise for stronger resilience.
- Turn anticlockwise for weaker resilience
(factory setting).
88

Installation options

External door panel
The door panel rests on
the panels of the unit.
Internal door panel
The door panel fits inside the body of
the unit. The front of the unit is visible.