Overview Presentation; User Interface Area - ENAG CDS4 Série Manuel Utilisateur

O
2.2
VERVIEW PRESENTATION
The chargers are divided into 2 zones :
•
The user interface zone
•
The energy conversion zone (all maintenance in this area is forbidden except with ENAG authorization, under
penalty of warranty termination)
Fixing of the charger is made by 4 x M6 round head screws (screw head diameter less than 10 mm).
Center distance :
Terminals :
J1201/J1202 : CAN Bus
X1200 : Remote display
X1201 : Battery temperature
probe
AC input terminals
U
2.3
SER INTERFACE AREA
Chargers CDS4 - See appendix 1
Chargers CDS4 12V/90, 24V/45A, 24V/60A and 24V/80A - See appendix 2
Charger CDS4 24V/100A – See appendix 3
Wall mounting stand
Circuit board 1A :
See datasheet
SEEL016662DE
DC output terminals
Opening screw for user interface area
(must be screwed to ensure personnel
protection)
Front view
2 x M6 round head screws
32