Clear The Settings; Clear The Memorised Settings And Remote Controls - SOMFY EXAVIA 500 Mode D'emploi

Clear the settings

The cleared settings are: the gate leaf travel and automatic closing of the gate.
When should I delete the settings?
After programming the gate leaf travel, if you change the opening position stop or if you modify the motor wiring.
In case of spurious obstacle detection because of normal wear on the gate.
Press the button on the control
1
electronics for 2 seconds.
The indicator light comes on.
Place the memorised remote control
2
on the target.
Keep button 1 of the remote control
3
depressed until the indicator light
flashes.
Press button 1 on the remote control once.
4
The "RESET" indicator light flashes.
Keep button 2 of the remote control
5
depressed until the RESET indicator
light comes on.
Indicator light flashes twice (see
page 8 to launch auto-programming
of the leaves' travel).

Clear the memorised settings and remote controls

The following will be cleared: the gate leaves' travel and automatic closing of the gate, and all the memorised controls and radio control points.
Press the button on the control
1
electronics for 2 seconds.
The indicator light comes on.
Place the memorised remote control
2
on the target.
Keep button 1 of the remote control
3
depressed until the indicator light
flashes.
Press button 1 on the remote control
4
once.
The "RESET" indicator light flashes.
Keep button 2 of the remote control
5
depressed until all the indicator lights
come on.
Indicator light flashes twice (see
page 8 to launch auto-programming
of the travel of the leaves).
2
1
>2s
5
2
1
>2s
5
4
3
4
3
x2
x2
17