Automatic closing
WARNING
For operation in automatic mode or remote control, photoelectric cells must be installed. In automatic mode, the drive mode
operates in at least one direction with no intentional activation by the user.
Activating automatic closing
The automatic closing can only be activated if the photoelectric cells are connected and recognised by the motor's control
electronics.
1
>2s
4
Press the
button on the control electronics for 2 seconds.
1
The indicator light
Position the remote control on the control electronics target.
2
Keep button 1 of the remote control depressed until the indicator light
3
4
Keep button 2 on the remote control depressed until the indicator light
5
When you release button 2, indicator light
The indicator light
Automatic closing is activated.
Deactivating automatic closing - returning to standard operation
To deactivate automatic closing mode and return to standard operation, repeat steps 1, 2 and 3 above then in step 4, briefly press button
2 of the remote control, indicator light
Press button 1 on the remote control 3 times.
14
2
3
comes on.
flashes; press button 1 on the remote control 3 times.
remains lit.
flashes.
Once step 3 has been carried out,
you can carry out the following
steps remotely (without placing the
remote control on the target).
5
flashes.
goes out and is then lit constantly.
x3