Securing The Control Unit To The Pillar; Connecting The Motors - SOMFY EXAVIA 500 Mode D'emploi

Securing the control unit to the pillar

Position the unit mounting bracket (7) against the pillar/wall.
1
Check that it is horizontal by placing a spirit level in the intended location.
2
Secure the bracket to the pillar/wall.
3
Secure the base of the unit to the pillar/wall: 1 screw (8) to secure
the unit to the bracket + 2 screws to secure the unit to the pillar/wall.

Connecting the motors

M1
Motor activates the gate leaf which
With the gate closed, identify the gate leaf
1
that opens first. M1 activates this gate
leaf.
Connect the motors as indicated in the table below:
2
Connect the wire for the ...
blue
M1
brown
blue
M2
brown
opens first and closes last,
and opens for pedestrian access.
M1 est à gauche
to terminal ...
10
11
12
13
OU
M1 est à droite
7