Hamilton Beach change-a-bowl Mode D'emploi page 6

840136000 Ev05.qxd
7. Cut food to fit food chute. Pack food
chute tightly with food. Insert food
pusher in chute. Always use the food
pusher to feed food into the chute.
NEVER PUSH FOOD THROUGH
CHUTE WITH FINGERS.
8. Plug in unit and process food by
turning ON.
Cleaning
1. Wash the GladWare
nent bowl, cover, disc, food pusher,
disc storage lid (optional accessory),
and disc lock in hot, soapy water.
The following parts may also be
washed in the top rack of the dish-
washer: GladWare
bowl, cover, disc, food pusher, disc
storage lid (optional accessory), and
disc lock.
2. Wipe the motor, switch, and cord
with a damp cloth or sponge. To
remove stubborn soil, use a mild
non-abrasive cleanser. NEVER
IMMERSE THE MOTOR IN WATER
OR OTHER LIQUID.
6
6/15/05 12:46 PM Page 6
bowl, perma-
®
bowl, permanent
®
9. When food chute is empty, select
OFF. Wait until blade has stopped
rotating before removing cover.
10. To process into another GladWare
bowl, turn motor counterclockwise
to unlock cover from permanent
bowl. Remove GladWare
insert an empty GladWare
3. To store, assemble the unit. Place
cover on bowl but do not lock.
OPTIONAL:
Place extra disc in disc storage area
under permanent bowl. Snap on disc
storage lid.
Optional Accessories
®
® bowl and
® bowl.