English; Safety Instructions - Bosch GHG 180 Professional Notice Originale

English

Safety instructions

Read all the safety information and instruc-
tions. Failure to observe the safety informa-
tion and follow instructions may result in elec-
tric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
This heat gun is not intended for
u
use by children and persons with
physical, sensory or mental limita-
tions or a lack of experience or
knowledge.
This heat gun can be used by chil-
u
dren aged 8 or older and by per-
sons who have physical, sensory
or mental limitations or a lack of
experience or knowledge if a per-
son responsible for their safety su-
pervises them or has instructed
them in the safe operation of the
heat gun and they understand the
associated dangers. Otherwise,
there is a risk of operating errors and
injuries.
Supervise children during use,
u
cleaning and maintenance. This will
ensure that children do not play with
the heat gun.
Handle the power tool with care.
u
The power tool produces intense
heat which increases the risk of fire
and explosion.
Take particular care when working in the vicinity of
u
flammable materials. The hot airflow or hot nozzle may
ignite dust or gases.
Do not work with the power tool in potentially explos-
u
ive areas.
Do not aim the hot airflow at the same area for pro-
u
longed periods. Working with plastic, paint, varnish or
similar materials may produce easily flammable gases.
Bosch Power Tools
Please be aware that heat is directed to covered flam-
u
mable materials, which may ignite.
Safely place the power tool down after use and let it
u
cool completely before packing it away. The hot nozzle
can cause damage.
Do not leave the switched-on power tool unattended.
u
Store idle power tools out of the reach of children. Do
u
not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Do not expose the power tool to rain or wet condi-
u
tions. Water entering a power tool will increase the risk of
electric shock.
Do not misuse the cable, for example by using it to
u
carry, hang up or unplug the power tool. Keep the cable
away from heat and oil. Damaged or entangled cords in-
crease the risk of electric shock.
Always wear safety goggles. Safety goggles reduce the
u
risk of injury.
Pull the plug out of the socket before adjusting the
u
tool settings, changing accessories, or storing the
power tool. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
Always check the power tool, cable and plug before
u
use. Stop using the power tool if you discover any
damage. Do not open the power tool yourself, and
have it repaired only by a qualified specialist using
only original replacement parts. Damaged power tools,
cables and plugs increase the risk of electric shock.
Keep your work area well-ventilated. The
gas and steam produced during work are often
harmful to one's health.
Wear protective gloves and do not touch the nozzle
u
while it is hot. There is a risk of burns.
Do not direct the airflow at persons or animals.
u
Do not use the power tool as a hair dryer. The outgoing
u
airflow is considerably hotter than that that of a hair
dryer.
Do not allow foreign objects to enter the power tool.
u
The distance between the nozzle and the workpiece
u
depends on the material you are working on (metal,
plastic, etc.) and the intended working method. Al-
ways test the amount of air and temperature first.
If operating the power tool in a damp location is un-
u
avoidable, use a residual current device (RCD) protec-
ted supply. Use of an RCD reduces the risk of electric
shock.
Never use the power tool if the cable is damaged. Do
u
not touch the damaged cable and pull out the mains
plug if the cable is damaged while working. Damaged
cables increase the risk of an electric shock.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
English | 5
1 609 92A 4FD | (04.10.2018)