Functional Description; Intended Use; English | 5 - Bosch GSR Professional 6-25 TE Notice Originale

Masquer les pouces Voir aussi pour GSR Professional 6-25 TE:

Notice originale (153 pages)

Notice originale (80 pages)

Notice originale (79 pages)

Table Des Matières

Table des Matières

Les langues disponibles

All manuals and user guides at all-guides.com

OBJ_BUCH-269-003.book Page 5 Thursday, October 29, 2009 12:56 PM

g) If devices are provided for the connec-

tion of dust extraction and collection fa-

cilities, ensure these are connected and

properly used. Use of dust collection can

reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the cor-

rect power tool for your application. The

correct power tool will do the job better

and safer at the rate for which it was de-

signed.

b) Do not use the power tool if the switch

does not turn it on and off. Any power

tool that cannot be controlled with the

switch is dangerous and must be re-

paired.

c) Disconnect the plug from the power

source and/or the battery pack from the

power tool before making any adjust-

ments, changing accessories, or storing

power tools. Such preventive safety

measures reduce the risk of starting the

power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfa-

miliar with the power tool or these in-

structions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e) Maintain power tools. Check for mis-

alignment or binding of moving parts,

breakage of parts and any other condi-

tion that may affect the power tool's op-

eration. If damaged, have the power tool

repaired before use. Many accidents are

caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Prop-

erly maintained cutting tools with sharp

cutting edges are less likely to bind and

are easier to control.

g) Use the power tool, accessories and tool

bits etc. in accordance with these in-

structions, taking into account the work-

ing conditions and the work to be per-

formed. Use of the power tool for

operations different from those intended

could result in a hazardous situation.

Bosch Power Tools

5) Service

a) Have your power tool serviced by a qual-

ified repair person using only identical

replacement parts. This will ensure that

the safety of the power tool is maintained.

Safety Warnings for Screwdriver

Hold power tool by insulated gripping sur-

faces, when performing an operation where

the fastener may contact hidden wiring or

its own cord. Fasteners contacting a "live"

wire may make exposed metal parts of the

power tool "live" and could give the operator

an electric shock.

Hold the machine with a firm grip. High re-

action torque can briefly occur while driving

in and loosening screws.

Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held

more secure than by hand.

Always wait until the machine has come to

a complete stop before placing it down. The

tool insert can jam and lead to loss of control

over the power tool.

Never use the machine with a damaged ca-

ble. Do not touch the damaged cable and

pull the mains plug when the cable is dam-

aged while working. Damaged cables in-

crease the risk of an electric shock.