Registering Your Thermostat Online - Honeywell RTH8500 Guide De L'utilisateur

Thermostat programmable à écran tactile wi-fi

Masquer les pouces Voir aussi pour RTH8500:

Guide d'installation (64 pages)

Guide d'installation rapide (60 pages)

Mode d'emploi (48 pages)

Table des Matières

Les langues disponibles

Connecting to your Wi-Fi network

Note:

If your Wi-Fi network does not appear in the list on the Thermostat Wi-Fi Setup

page:

• Try performing a network rescan by pressing the Rescan button. This is helpful in

areas with a lot of networks.

• If you are connecting to a hidden network, then enter the network SSID in the

textbox, select the encryption type from the drop down menu, and click on the

Add button. This manually adds the network to the top of the list. Click on the new

network in the list and enter the password if necessary. Click on Connect to join the

network.

3 Make sure your thermostat is connected.

The message center on your thermostat will

now display CONNECTING... for up to 30

seconds.

Look at the thermostat display. Verify that the

message center displays one of the following:

CONNECTION SUCCESSFUL

JOINED: [WI-FI NETWORK NAME]

YOU ARE ALMOST DONE

If you see one of these messages, continue on page 12.

Note:

If you see CONNECTION FAILURE or Wi-Fi SETUP in the

message center, confirm you correctly entered your home network

password in step 2c. If correct, refer to the FAQ at wifithermostat.com/support