Hitachi RAK-18PSA Mode D'emploi page 15

COOLING OPERATION
Press the (COOL) button to start cooling operation.
Press the
STOP
POWERFUL OPERATION
By pressing (POWERFUL) button during AUTO, HEATING, DEHUMIDIFYING or, COOLING the
air conditioner performs at the maximum power.
During POWERFUL operation, cooler or warmer air will be blown out from indoor unit for COOLING of
HEATING operation respectively.
STOP
When SLEEP mode, or LEAVE HOME mode is selected, POWERFUL operation is cancelled.
During POWERFUL operation, capacity of the air conditioner will not increase
– if the air conditioner is already running at maximum capacity.
– just before defrost operation (when the air conditioner is running in HEATING operation).
After auto restart, POWERFUL operation is cancelled and previous operation shall start.
(COOL) button.
Adjust the room temperature and fan speed to your preference.
Temperature range between 16°C~32°C can be set.
Press the (STOP) button.
A short beep sound is emitted and cooling operation stops.
Press (POWERFUL) button during operation.
" " is displayed on the LCD.
Press ( STOP) button.
Press (POWERFUL) button again.
POWERFUL operation stops.
" " disappears from the LCD.
– 9 –
Or