Long-Term Storage - Titan XL255 Mode D'emploi

Follow these instructions only after all cleanup steps have been performed.
1. Fill a cup or other container with two ounces of
separating oil (P/N 0516444, sold separately) and
submerge the inlet valve into the oil. Light household oil
can be substituted.
2. Place a rag over the spray hose port, and turn the switch
ON (l). When the oil has been pumped from the cup,
turn the pump OFF (O).
3. Fully insert the Quickflo™ valve.
If you have a cart model (XL295 or XL335), you can collapse the cart for easier storage.
1. With one hand on the handle, twist
the knob on either side of the cart
toward the "DOWN" arrow.

Long-Term Storage

Separating oil
2. When the knob is fully "DOWN", this
will release the handle and it can
be folded down until it is locked into
place. Be careful not to pinch the
power cord with the cart.
19
4. Wipe the entire unit, hose and gun with a damp cloth to
remove accumulated paint. Replace the high pressure
hose to the paint hose port.
3. Lift the leg lock, and fold the legs in.
Replace the leg lock to hold the legs
into place.
English