Maintenance - Health O Meter 402KL Notice D'utilisation

MAINTENANCE

The following provide instructions for maintenance and cleaning for the 402KL. Maintenance
operations other than those described in this manual should be performed by qualified service
personnel.
MAINTENANCE
Before first use and after periods of non-use, check the scale for proper operation and function.
If the scale does not operate correctly, refer to qualified service personnel.
1. Check overall appearance of the total scale for any obvious damage, wear and tear.
2. Do not store near chemicals, heaters or radiators.
3. Do not drop, kick, or jump on the scale.
4. This scale is a sensitive weighing device. Items such as clothing or towels placed or
dropped on the scale may cause it to operate incorrectly. In order to prevent this, do not
store or leave anything on the scale.
5. If your scale fails to work properly, do not attempt to dismantle it. This will void your
warranty. See warranty information instructions on having your scale serviced.
6. All bearings and working parts are permanently lubricated. DO NOT USE OIL OR
LUBRICANTS.
CLEANING
Proper care and cleaning is essential to ensure a long life of accurate and effective operation.
1. Clean all external surfaces with a clean damp cloth or tissue. Mild antimicrobial or
antibacterial soap and water solution may be used. Dry with a clean soft cloth.
2. Do not immerse the scale into cleaning or other liquid solution.
3. Do not use abrasive cleaners.
Replacement Parts
PART NUMBER
400HARDWARE
55000
55090
55080
55085
402KLROD
400BASE
400COVER
DESCRIPTION
ALLEN WRENCH AND HEX SCREWS
WHEELS
COUNTERWEIGHTS
LB COUNTERWEIGHT
KG COUNTERWEIGHT
HEIGHT ROD
BASE
PLATFORM COVER
24
UNIT OF
MEASURE
1 SET
1 EA
2 EA
1 EA
1 EA
1 EA
1 EA
1 EA