Structure And Installation; Safety Instructions - Burkert AirLINE 8644 Mode D'emploi

Structure and installation
8. sTrucTure and insTallaTion
8.1. safety instructions
Danger!
risk of injury from high pressure in the equipment!
• Before loosening lines or valves, turn off the pressure and vent
the lines.
risk of injury due to electrical shock!
• Before reaching into the device or the equipment, switch off the
power supply and secure to prevent reactivation!
• Observe applicable accident prevention and safety regulations
for electrical equipment!
Warning!
risk of injury from improper assembly!
• Installation may only be carried out by authorized technicians with
the appropriate tools!
risk of injury from unintentional activation of the system and
uncontrolled restart!
• Secure system from unintentional activation.
• Following assembly, ensure a controlled restart.
Type 8644
Caution!
escape of medium and malfunction!
If the seals are not seated correctly, leaks and malfunctions may occur
due to pressure losses.
• Ensure that the seals are seated correctly in the area of the elec-
tronics and pneumatics.
short-circuit, malfunction!
The electrical connection requires exact contacting.
• Do not bend contacts.
• If connections are damaged or bent, replace the affected
components.
• Do not switch on the system unless the components are in perfect
condition.
note!
operate the system with direct current only!
To prevent damage to the system, use only direct current for the
system power supply.
prevent a pressure drop!
To prevent a pressure drop, design the system pressure supply with
the largest possible volume.
english
11