System Description; Application Area - Burkert AirLINE 8644 Mode D'emploi

6. sysTem descripTion
6.1. application area
The AirLINE system is designed for decentralized use in industrial
environments. Electronics and fluidics can be combined particularly
easily and efficiently thanks to the modular design.
Danger!
danger of explosion!
If systems in the explosion-protected area (Type 8644 Siemens and
Wago) are installed in a control cabinet, the following requirements
must be met:
• The control cabinet must be authorized for use in the explosion-
protected area.
• The control cabinet must be large enough to allow the resulting lost
heat to be dissipated in a suitable manner to the outside.
• The internal temperature of the control cabinet must not exceed
the max. permitted ambient temperature for the device.
risk of electric shock!
• Before reaching into the device or the equipment, switch off the
power supply and secure to prevent reactivation!
• Observe applicable accident prevention and safety regulations for
electrical equipment!
8
english
Type 8644
System Description
6.2. system description
Fig. 1: Type 8644 AirLINE
The Type 8644 AirLINE is an electrical and pneumatic automation
system which was developed for use in the control cabinet or switch
box. In a continuous system all electronic and pneumatic components
are standardized, enabling pneumatic, electric and electronic modules
with various functions to be combined very easily with each other by
the observation of simple rules.