General Information On Operation Of The Menus - VOLTCRAFT V-CHARGE 100 DUO Notice D'emploi

c) General Information on Operation of the Menus
For an overview of the menu structure, see the next chapter.
The two outputs #1 and #2 of the charger are independent of each other.
Operation of the two outputs (charge/discharge channels) takes place via a lit LC display each
and four buttons to its right.
• Exit each setting menu using the "BATT. TYPE/STOP" each; pushing this button several times
will return you to the main menu.
• Select the desired submenu from the main menu using the "INC" or the "DEC" button and
confirm your selection with the button "START/ENTER".
• Using the buttons "INC" and "DEC", the various configuration options are selected.
• To modify a value or setting, push the "START/ENTER" button; the display then flashes. •
Modify the value flashing in the display using the "INC" and "DEC" buttons. For quick adjust-
ment of a value (e.g. the charging current), keep the respective button pushed for a longer
time.
• Save the (modified) value with the "START/ENTER" button.
Various information is indicated on the display during a charge/discharge process by
repeatedly pressing the button "DEC" (see chapter 20). If you do not push any button
for a few seconds, the charger will return to the normal display.
If a lithium rechargeable battery with balancer plug is connected to the charger, you
can switch to the display of the individual cell voltages during charging/discharging by
pushing the button "INC". Briefly push the button "START/ENTER" for the charger to
return to the normal display.
80