Safety Devices - Sanremo CUBE V Livret D'instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Safety devices

2
SAFETY DEVICES
2.1 SAFETY LABELS
Warning labels with descriptive pictograms are
present in all areas that are dangerous for the
operator or technician.
Labels showing safety instructions
are applied to the machine;
they must be followed carefully
by anyone operating on the
machine. Failure to comply with
the instructions on the label waives
any liability of the manufacturer
for damage to property or injury to
persons that may arise.
Danger: voltage on
Nameplate located on all live areas. Do
not work while the voltage is on.
2.2 AREAS WITH RESIDUAL RISKS
Areas with residual risks are areas that cannot be
protected due to the specific type of operation they
are used for; on the coffee machine, these areas are
as follows:
- the area (1) of the unit when dispensing coffee;
- the steam tap area (2) when heating drinks;
- the hot water dispensing area (3).
Risk of burning is present in these
areas.
To move the steam wand and the
hot water tap, use only the gripping
point with the silicone grommets (2A
and 3A)
SAFETY DEVICES
2.3 DANGEROUS AREAS
35
2A
2
Dangerous areas are all areas
inside the machine, under the
safety guards, where the technician
can operate when repairing the
machine. These areas are accessible
only by the technician.
CUBE
3
3A
1

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cube r

Table des Matières