Nice Maestro300 Instructions Et Avertissements Pour L'installation Et L'utilisation page 39

6.2 - INSTALL AND CONNECT FL200 FLASHING
INDICATOR (fig. 15)
• The flashing light must be positioned near the gate in a clearly
visible position. It can be fasted to a horizontal or vertical surface.
• For connection to the Flash terminal, no polarity needs to be observed;
instead for connection of the shielded aerial cable, it is necessary to con-
nect the cable and sheath as shown in Fig. 12.
Choose the most suitable position in which to install the flashing light: it
must be positioned near the gate in a clearly visible position. It can be
fasted to a horizontal or vertical surface.
For the installation procedure see Fig. 15.
15 01. 02. 03. 04.
2
1
05. A
Ø = 6 mm
x4
05. B
x4
Ø = 6 mm
06. 07.
08. 09.
(flash) (aerial)
1
2
English – 11