Nice Maestro300 Instructions Et Avertissements Pour L'installation Et L'utilisation page 116

EC Declaration of Conformity
Declaration in accordance with the following Directives: 1995/5/EC (R&TTE), 2014/30/EU (EMC); 2006/42/EC (MD) Annex II, Part B
Note - The contents of this declaration correspond to that stated in the official document filed in the offices of Nice S.p.A. and, in particular, the latest version thereof
available prior to the printing of this manual. The text herein has been re-edited for editorial purposes. A copy of the original declaration can be requested from Nice
S.p.A. (TV) Italy.
Number: 576/MAESTROC
Manufacturer's name:
Address:
Person authorised to draw up
technical documentation:
Product type:
Model / Type:
Accessories:
The undersigned, Roberto Griffa, as Chief Executive Officer, hereby declares under his own responsibility that the product identified above com-
plies with the provisions of the following directives:
• DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 9 March 1999 on radio equipment and telecommunica-
tions terminal equipment and the mutual recognition of their conformity, in accordance with the following harmonised standards:
– Health and safety (Art. 3(1)(a)): EN 62479:2010
– Electrical safety (Art. 3(1)(a)): EN 60950-1:2006+A11:2009+A12:2011+A1:2010+A2:2013
– Electromagnetic compatibility (Art. 3(1)(b)): EN 301 489-1 V1.9.2:2011, EN 301 489-3 V1.6.1:2013
– Radio spectrum (Art. 3(3)): EN 300 220-2 V2.4.1:2012
• Models MAESTRO200M, MAESTRO200C, MAESTRO300M, MAESTRO300C conform to DIRECTIVE 2014/30/EU OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagne-
tic compatibility (recast), in accordance with the following harmonised standards: EN 61000-6-2:2005, EN 61000-6-3:2007 + A1:2011
• Models MAESTRO200M, MAESTRO200C, MAESTRO300M, MAESTRO300C conform to DIRECTIVE 2014/35/EU OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmonisation of the laws of Member States relating to the making available
on the market of electrical equipment designed for use within certain voltage limits (recast), according to the following harmonised standards:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 + A15:2011; EN 60335-2-103:2003+A11:2009,
EN 62233:2008
In addition, models MAESTRO200M, MAESTRO200C, MAESTRO300M, MAESTRO300C conform to the following directive in accordance with
the provisions applicable to the "partly completed machinery":
• Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 17 May 2006 regarding machines and amending directive 95/16/
EC (recast)
– It is hereby declared that the relevant technical documentation has been compiled in accordance with Annex VII Part B of Directive 2006/42/
EC and that the following essential requirements have been applied and fulfilled: 1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2- 1.5.5- 1.5.6- 1.5.7-
1.5.8- 1.5.10- 1.5.11
– The manufacturer agrees to transmit to the national authorities any pertinent information on "partly completed machinery", in response to a
motivated request, without prejudice to its intellectual property rights.
– Should the "partly completed machinery" be commissioned in a European country with an official language different to the one used in this
declaration, a translation into that language accompanying this declaration must be provided by the importer.
– The "partly completed machinery" may not be commissioned until the final machinery into which it is to be incorporated has been declared to
conform to the provisions of Directive 2006/42/EC, where appropriate.
Moreover, the parts of the models MAESTRO200M, MAESTRO200C, MAESTRO300M, MAESTRO300C which are subject to the following stan-
dards comply with them: EN 13241-1:2003 + A1:2011, EN 12445:2000, EN 12453:2000, EN 12978:2003 + A1:2009
Oderzo, 28 July 2016
02
Revision: 1 Language: EN
NICE S.p.A.
Via Pezza Alta 13, 31046 Rustignè di Oderzo (TV), Italy
NICE S.p.A.
24VDC electro-mechanical gearmotor for swing gates
MAESTRO200C, MAESTRO200M, MAESTRO300M, MAESTRO300C
PR100 (MAESTRO300C), PR300 (MAESTRO200C), ECCO5BO, ECCO5WO, PH200, FL200
Ing. Roberto Griffa
(Chief Executive Officer)