External Component Operations - JVC KW-XC770 Manuel D'instructions

EXTERNAL COMPONENT OPERATIONS

You can connect the external component to the CD changer jack on the rear using the Line
Input Adaptor KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the following procedure, select the external input
correctly. (See "Selecting the external component to use" on page 26.)
1
CD-
CH
Note on One-Touch Operation:
When you press CD-CH, the power automatically comes on. You do not have to press
ATT
2
Turn on the connected component and start playing the source.
3
SEL
32
SCM
3
SEL
7
Select the external component.
• If "LINE INPUT" does not appear on the display, see page
26 and select the external input ("PSM LINE IN").
to turn on the power.
To turn up the
volume
To turn down
the volume
8 9 10 11 12
Adjust the volume.
1
ANA