Publicité
Les langues disponibles
Les langues disponibles
Operating instructions
Pendant luminaire Plainly, E27, 60 W
Item no. 1273986 (white)
Item no. 1273987 (blue)
Item no. 1273988 (brown)
Item no. 1273989 (green)
Item no. 1273990 (orange)
Item no. 1273991 (black)
Item no. 1273992 (yellow)
Intended use
The product is intended for ceiling installation in interior spaces for use as a light
source. A suitable illuminant is available separately.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product.
If you use the product for purposes other than those described above, the product may
be damaged. In addition, improper use can cause hazards such as short circuiting,
fire, electric shock etc. Read the instructions carefully and keep them. Make this
product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
Delivery content
• Pendant luminaire
• 1 x dowel
• Screw hook
• Operating instructions
Description of symbols
This symbol indicates health risks e.g. due to electric shock.
The symbol with an exclamation point indicates special risks
associated with handling, operation or use.
This symbol determines the minimum distance to illuminated
0.5m
surfaces.
The light should be exclusively used in dry interior spaces. It
should not become damp or wet.
Symbol for Protection Class II
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets. This
poses a risk of fatal electric shock!
• Do not leave packaging material lying around carelessly. These may
become dangerous playing material for children.
• Operate the product using a common household supply voltage of
220 – 240 V/AC, 50 Hz only.
• The product is only suitable for fixed installation.
• Keep a minimum distance of at least 50 cm between illuminants and
illuminated surfaces (especially flammable objects e.g. curtains).
• Do not touch the product during use. First, turn off the product and let it
cool down sufficiently. Failure to do so poses a risk of burning!
• Do not attach any objects (e.g. decorative material) to the product.
• Do not look into the light directly or with any optic instruments. There is a
risk of eye damage!
• For installations in industrial facilities, follow the accident prevention
regulations for electrical systems and equipment of the government
safety organization or the corresponding authority for your country.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
• Consult an expert when in doubt about operation, safety or connection of
the device.
• Maintenance, modifications and repairs are to be performed exclusively
by an expert or at a qualified shop.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Preparing installation
Installation of the product must be carried out by a qualified professional
(i.e. an electrician) who is familiar with all applicable regulations!
By handling mains voltage improperly, you endanger not only yourself but
also others!
If you do not have the relevant expert knowledge, do not install the product
yourself, but have it done by a professional.
• Mount the product exclusively on an even, stable ceiling.
• Never mount the product in the vicinity of easily flammable materials (i.e. curtains,
fabrics, etc.). Make sure there is sufficient room for ventilation around the product.
• When mounting the product, take into consideration the routing of the mains cable.
• Only use a suitable, fixed mains cable for power supply.
• A suitable switch is required for turning the product on and off.
• The product must be secured via an existing sub-distribution unit with a 10/16A fuse.
This setup requires the installation of an upstream residual current circuit breaker
(FI switch).
• The product must be completely free of voltage for installation. Just turning off the
light via the switch does not make it entirely voltage-free.
• Turn off the corresponding circuit breaker and/or automatic fuse to remove all
voltage from the power circuit. Secure them against unauthorized restart, e.g. by
installing a warning sign. Also switch off the relevant circuit breaker in order to
disconnect all poles of the mains cable from the mains supply.
• Check the power circuit for any remaining voltage using an appropriate measuring
device.
Publicité
