Keys And Functions - Festo SPAW B2R Mode D'emploi

6. Commissioning, operation

6.5 Keys and functions

The pressure sensor has two operating modes, the display mode and the programming mode. The selected operating
mode determines the respective function of the key.
EN
Status switching output 2
Status switching output 1
Display mode
▶ Short press
Display of the unit
▶ Long press
Display of the set parameters
see chapter 6.6 "Parameters"
Programming mode
▶ Short press
Menu up
Parameter value up (step-wise)
▶ Long press
Menu up
Parameter value up (fast)
14
OI_14070935_SPAW_GB_D_F_E.indd 14
Jumping into the programming mode
Keep the "MENU" key pressed for approx. 5 seconds. If the password is set to ≠ 0000, a
password will be requested. If authentication is successful, then it enters the programming
mode, otherwise it reverts to display mode.
Returning to the display mode
Simultaneous pressing of both keys.
4-digit LED display
Display pressure value
■
Display menu item
■
Display parameter
■
Display mode
▶ Short press
Display of the unit
▶ Long press
Jumping into the programming mode
Programming mode
▶ Short press
Menu up
Parameter value up (step-wise)
▶ Long press
Menu up
Parameter value up (fast)
Display mode
▶ Short press
Display of the unit
Programming mode
▶ Short press
Select menu item
Confirmation of the input
Pressure sensor SPAW
05.08.2013 11:02:26