Safety Instructions And Residual Risks - wissner-bosserhoff movita Notice D'utilisation

22. Safety instructions and residual risks

1) The details on the nameplate must be observed.
2) The bed may not be operated in case of malfunctions that could pose a risk to persons.
3) Before operating the bed, the user must verify the functional safety and proper condition
of the bed.
4) The bed must be subjected to a functional test, daily or with each change of shift, so that
it is guaranteed that the bed can be used as intended without danger to the patient or the
user.
5) Only authorized staff may adjust the side guards. When adjusting the patient surface po-
sition, nursing staff must make sure the patient does not come into contact with the side
guards to avoid crush injuries to the hands, legs or other body parts.
6) Avoid leaning the upper body to the side extremely.
7) Do not load the side guards with more than 75 kg in a vertical and more than 50 kg in a
horizontal direction.
8) Lock/release the functions of the handset depending on the physical and mental state of
the patient. Check the locking functions with the handset.
9) Since the system can be used in battery operation, it is not enough just to pull out the plug
in case of the motors functioning incorrectly. In case of a malfunction, please contact our
customer service.
10) Position the power and connection cable to the handset so that they are not crushed and
do not place any objects on the power and connection cables.
11) If the positioning and height adjustment functions are used, ensure that the safety key is
not in the lock or in the vicinity of the handset (in the range of the resident). If released
with the safety key unintentionally, positions that may pose a risk to the resident might be
activated, such as an incorrectly applied Trendelenburg position.
141