Crutch Holder - ORTHOSCOOT NH1 Instructions D'utilisation

Crutch holder (Art.-No.: NH1ER/1037)
Please note that the crutch holder can be mounted on either the right or left side. The images in this user manual
show it attached to the right side.
Step 1: To attach the crutch to the crutch holder,
push it to the shortest setting and insert it parallel
into the recesses on the rubber blocks (see figure 1).
1
Figure 1
Step 3: Now, tighten the rubber straps (E) over the
crutches and fix the handle in the fastening slot.
(Ensure that the handle is positioned parallel to the
closing edge of the base plate (see figure 3).)
3
Figure 3
50
Sie sind die erste Person die das hier liest.
Step 2: The handles will point forward, and the under-
arm supports of the crutches (F) are positioned inter-
locking with one another (see figure 2).
2
innen = oben
außen = unten
Figure 2
Step 4: The crutches are now fastened for transpor-
tation. However, check to ensure they are securely
fixed in place every time you start moving.
To remove the crutches, pull the strap handle out of
the fastening slot. Now you can remove the crutches
and adjust them to your height.
4
Figure 4
ORTHOSCOOT NH1
®