Adjusting The Knee Pad - ORTHOSCOOT NH1 Instructions D'utilisation

Adjusting the knee pad

Please read the following steps carefully and take sufficient time to complete the settings. Always test out diffe-
rent settings, complete test runs and make comparisons before settling on a final position. If you cannot decide
between two settings, please always choose the lower of the two. Ensuring the machine is perfectly adjusted to
meet your needs is important to ensure you can use it ergonomically.
First, please open the quick release on the knee pad
clamp.
The height markings serve as a reference (right scale
= height in cm / left scale = height in feet).
Select your position and allow the locking pin to snap
back into the desired positioning hole.
ORTHOSCOOT NH1
®
Körpergrößen:
~ 140 cm / 4`7"
~150 cm / 4`11"
~160 cm / 5`3"
~170 cm / 5`7"
~180 cm / 5`11"
~190 cm / 6`3"
~200 cm / 6`7"
Pull the lock washer to release the knee pad support
from its locked position and move it vertically.
Close the quick-release. The knee pad is now adjus-
ted correctly and secured.
37