Installation; General - Atag WS9111FM Notice D'utilisation

INSTALLATION

General

This appliance should be connected to the mains power by a registered
installer, who knows and applies the correct safety specifications. The
appliance meets European requirements.
Important information:
• The distance between the lowest point of the cooker hood and
a gas hob should be at least 65 cm. With an electric, ceramic or
induction hob this distance should be at least be 45 cm.
• If the appliance is connected to an existing ducting outlet, no other
appliances should be connected to that outlet (such as a heater or
boiler).
• Follow the applicable local regulations regarding the ventilation of
gas appliances.
• With a short exhaust-air pipe and few bends, the cooker hood will
work better.
• Prior to drilling check that there are no pipes or cables present.
• The cooker hood connection pipe is 120 mm or 150 mm in
diameter. It is best to use this diameter for the ducting pipe.
EN 11