Télécharger Imprimer la page

EdilKamin ECOIDRO Installation, Usage Et Maintenance page 22

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 42
Dear Sir or Madam,
thank you for choosing our Ecoidro stove.
Before using your stove, please read this booklet carefully: it explains how to get the most from all its features in complete safety.
Please remember that the 1st ignition MUST be carried out by Dealer, which inspects the installation and fills in the guarantee.
Every country must refer to its own national regulations.
The manufacturer cannot be held liable for any damage which may derive from using the stove after incorrect installation,
incorrect maintenance or misuse.
SAFETY INFORMATION
THE STOVE MUST NEVER BE RUN WITHOUT WATER IN THE SYSTEM.
"WATERLESS" IGNITION DAMAGES THE STOVE.
The stove is designed to heat water through the automatic combustion of pellets in a firebox.
The only risks which may derive from using the stove are linked with non-compliance with the installation instructions, direct
contact with live electrical parts (inside) or with the fire or hot parts, and the introduction of foreign substances.
If components fail, the stove is fitted with safety devices which shut it down. This must be allowed to happen without interference.
For correct operation, the stove must be installed in compliance with the instructions herein, and the door must not be opened
during operation: combustion is managed automatically so no manual operations are needed.
Never put foreign substances in the firebox or hopper.
Do not use flammable products to clean the smoke duct.
Firebox and hopper components must only be cleaned WHEN COLD using a vacuum cleaner.
The glass must be cleaned when COLD with a special product (e.g. GlassKamin) and cloth. Do not clean when hot.
During stove operation, the outlet pipes and door reach high temperatures.
Do not keep objects which are not able to withstand heat in the immediate vicinity of the stove.
NEVER use liquid fuels to light the stove or rekindle the embers.
Do not block ventilation openings in the room where the stove is installed or air inlets in the stove itself.
Do not wet the stove, and do not put wet hands near electrical parts.
Do not fit reducers on the smoke outlet pipes.
The stove must be installed in a suitable place as regards fire safety, and provided with all the facilities (power supply and
outlets) it requires for correct safe operation.
Should ignition fail, DO NOT re-ignite until you have emptied the combustion chamber.
DECLARATION OF CONFORMITY
The undersigned EDILKAMIN S.p.a. with head office headquarters at Via Vincenzo Monti 47 - 20123 Milan - Italy -
VAT IT00192220192
Declares under its own responsability as follows:
The wood pellet thermostove specified below is in accordance with the 89/106/EEC (Construction Products)
WOOD PELLET THERMOSTOVE, trademark EDILKAMIN, called ECOIDRO
Year of manufacture:
Serial number:
The compliance with the 89/106/EEC directive is besides determined by the compliance with the European standard:
UNI EN 14785:2006 as test report 30-6467/3 delivered by:
STROJIRENSKY ZKUSEBNI USTAV, s.p., BRNO, Ceska republika, notified Body 1015
and by documentation delivered to STROJIRENSKY ZKUSEBNI USTAV
22
Ref. Data nameplate
Ref. Data nameplate

Publicité

loading